Snow Attachments snow thrower belt

   / snow thrower belt #1  

Anonymous Poster

Epic Contributor
Joined
Sep 27, 2005
Messages
29,678
I need the belt number and/or size of the drive belt for my Case H-80 snowthrower on my Case 222 tractor. The belt was old and disintegrated, taking with it the number and leaving no hope of measuring.

Thanks

thisoldfarmer
 
   / snow thrower belt #2  
try using a small piece of rope about the same diameter of the belt around all pulleys and mark or cut where they start to overlap. make sure tension pulleys are backed off to allow for tension on new belt when measuring with rope. take that piece of rope to local parts store and size it up to a belt that matches the rope lenth. that should get you going agian.
 
   / snow thrower belt #3  
I just replaced the belt on my 448. It used a 4L800 belt. That would be a good place to start.
 
   / snow thrower belt
  • Thread Starter
#4  
Thank you to all who took time to read my post and to those who replied. I had forgotten about the rope trick. Thanks again for the info.

thisoldfarmer
 

Tractor & Equipment Auctions

2011 Chevrolet Impala Sedan (A51694)
2011 Chevrolet...
Case IH 3408 8 Row Corn Head (A52349)
Case IH 3408 8 Row...
1995 VOLVO BM A25C 6X6 OFF ROAD WATER TRUCK (A51246)
1995 VOLVO BM A25C...
2014 DIAMOND C TRAILER MFG. (A50322)
2014 DIAMOND C...
UNVERFERTH 330 - 19-INCH EXTENSION KIT FOR RIP-STRIP TOOLBAR PART # 63186G (A52748)
UNVERFERTH 330 -...
New Wolverine72 In Skid Steer Brush Cutter (A53002)
New Wolverine72 In...
 
Top