Snowblowers
- Thread starter dave1132
- Start date
- Views: 6608
fountain42
Member
- Joined
- Apr 3, 2008
- Messages
- 45
Deere makes a 59" front mount.
[ame=http://www.youtube.com/watch?v=A1HLTkoDYqk]John Deere 3520 Cab - YouTube[/ame]
[ame=http://www.youtube.com/watch?v=A1HLTkoDYqk]John Deere 3520 Cab - YouTube[/ame]
psdx
Gold Member
dave1132 said:
2758M -59" Snowblower - $3,910
LVB24815 - Front three-point hitch with A-frame quick attach system - $1,255
LVB27451 - Snowblower Mounting Kit - $179
LVB24800 - Snowblower Driveshaft - $135
LVB24810 -Optional front three point hitch/ mid mount mower draft arms if used with 7-iron deck -$205
This assumes the tractor has a mid PTO and dual SCV.
That should be pretty close - close enough to get an idea of the cost anyway.
newt92
Gold Member
fountain42
Member
- Joined
- Apr 3, 2008
- Messages
- 45
Chooglin that's not meI just posted the vidio for Dave to see the blower. I have to backup to blow snow with mine. Dave were are you at? I know of two of these for sale in central Wisconsin.
Wyobuckaroo
Platinum Member
Fountain
I'm not far away at all........... (north west corner WI)
Send me a PM with info on these blowers.
Thanks
I'm not far away at all........... (north west corner WI)
Send me a PM with info on these blowers.
Thanks
sriddle1ny
Bronze Member
Dave,
Just went through this drill with my JD790 and purchased a new JD59 and required Retro Kits. Here's an on-line tool perhaps you don't know about, John Deere has all the parts and attachments for your tractor listed in their on-line Parts Catalog. Follow this link below and change the model to your tractor, right now its pointing to a 790.
John Deere - Parts Catalog
Next, go to the Sectional Index (again under your model number) and locate the 59inch Snowblower. Go down and look at lines 25, 26, 34 and 40 that indicate they are applicable to Series 35. There you'll see specific Retro-Kit Part Numbers required to attach a JD59 to your tractor. Once you have those in hand then you can visit your JD Dealer for pricing or they are often listed on EBay or even on this site. If you do a search on my userid you'll see I posted pricing for (3) similar kits I used on my 790. The kits and JD59 were very easy to install and I've documented it along the way which I can share, just let me know Good Luck........
Just went through this drill with my JD790 and purchased a new JD59 and required Retro Kits. Here's an on-line tool perhaps you don't know about, John Deere has all the parts and attachments for your tractor listed in their on-line Parts Catalog. Follow this link below and change the model to your tractor, right now its pointing to a 790.
John Deere - Parts Catalog
Next, go to the Sectional Index (again under your model number) and locate the 59inch Snowblower. Go down and look at lines 25, 26, 34 and 40 that indicate they are applicable to Series 35. There you'll see specific Retro-Kit Part Numbers required to attach a JD59 to your tractor. Once you have those in hand then you can visit your JD Dealer for pricing or they are often listed on EBay or even on this site. If you do a search on my userid you'll see I posted pricing for (3) similar kits I used on my 790. The kits and JD59 were very easy to install and I've documented it along the way which I can share, just let me know Good Luck........
