Snufulupagus For The Win!

   / Snufulupagus For The Win! #1  

PowerTracManiac

Silver Member
Joined
Jan 4, 2020
Messages
229
Location
Central, Virginia
Tractor
Power Trac 1460
Workign great with my PT to SSQA adapter plate. Going to frame up the walls and trusses for my garage as soon as the concrete is complete.
Getting some very high prices for the garage construction. Can easily do the walls and trusses with this attachment.
Snufelupagus Resized.jpg
 
   / Snufulupagus For The Win! #2  
Workign great with my PT to SSQA adapter plate. Going to frame up the walls and trusses for my garage as soon as the concrete is complete.
Getting some very high prices for the garage construction. Can easily do the walls and trusses with this attachment.
View attachment 3971155
How far doe that thing extend!??
 
   / Snufulupagus For The Win! #3  
When I added our addition to our garage a few years ago, I used the PT425 forks to set the first section of 12'w X 8'h wall. Then I realized it was just easier for my wife and me to tip up each section into place manually. They were 12' x 8' sections up onto 1 course of concrete block. I set the trusses by myself by leaving them upside down, carrying them into the garage, setting one end up on the left wall overhung, setting the other end over the right wall, then swinging them up into place with a pusher 2x4.

So how tall are your side walls going to be?
 
   / Snufulupagus For The Win!
  • Thread Starter
#4  
The boom pole goes out to about 25 feet. There is a main section, a hydraulic telescoping section and another final section that gets you to the approx. 25 total feet.
My garage is either going to be 12 or 14 foot walls with about another 8 inches of block to the final concrete?
Have not decided the final wall height yet as I am considering a car lift for the inside. My initial plan was 12 foot walls but as I learn more about the car lifts, it seems people are recommending 14ft walls? Concrete scheduled for the the next week, so I have to decide soon.
 
   / Snufulupagus For The Win! #5  
The boom pole goes out to about 25 feet. There is a main section, a hydraulic telescoping section and another final section that gets you to the approx. 25 total feet.
My garage is either going to be 12 or 14 foot walls with about another 8 inches of block to the final concrete?
Have not decided the final wall height yet as I am considering a car lift for the inside. My initial plan was 12 foot walls but as I learn more about the car lifts, it seems people are recommending 14ft walls? Concrete scheduled for the the next week, so I have to decide soon.
Nice!

I've got an older garage with 10' walls and there's no way a lift would fit in there and be able to lift our suburban more than a couple/3 feet at most. So even 12' would only get it 4-5 feet off the ground at most and I'd still have to stoop to get under it.

Best advice would be to visit someone that has a lift and measure their ceiling.
 
   / Snufulupagus For The Win! #6  
If you plan to add a second floor office/storage level in part of the garage, make the walls 16 feet.
 

Tractor & Equipment Auctions

Generac 5000Watt Heavy Duty Diesel Generator (A51691)
Generac 5000Watt...
2022 Quick Attach Brush Buster - Heavy-Duty Skid Steer Cutter for Brush and Overgrowth (A52748)
2022 Quick Attach...
Guard Rail Pieces (A51692)
Guard Rail Pieces...
2005 Ford F-150 Ext. Cab Pickup Truck (A50323)
2005 Ford F-150...
2014 International Durastar 4300 Terex BT3063 63ft 15 Ton Crane Truck (A50323)
2014 International...
2018 FORD TRANSIT T150 CARGO VAN (A52577)
2018 FORD TRANSIT...
 
Top