F_22
Bronze Member
Here's a major manufacturer:
http://www.fabco-inc.com/
and their GA distributor:
http://www.getcoltd.com
Getco wouldn't sell direct to me though, I had to order through my local NH dealer. They also seem rather disorganized and sent the wrong shanks the first time. Price for seven 2A teeth and shanks was about $90. I got the 12L4DW-8-2A shanks which will put the bottom of the teeth flush with the bottom of my 3/4" bucket edge when welded on. That way I can still scrape my driveway without digging in if I keep the bucket level. All the bolt-on toothbars I found use shanks with a much larger drop so that the teeth are below the bucket edge, which is what made me decide to go the weld-on route.
http://www.fabco-inc.com/
and their GA distributor:
http://www.getcoltd.com
Getco wouldn't sell direct to me though, I had to order through my local NH dealer. They also seem rather disorganized and sent the wrong shanks the first time. Price for seven 2A teeth and shanks was about $90. I got the 12L4DW-8-2A shanks which will put the bottom of the teeth flush with the bottom of my 3/4" bucket edge when welded on. That way I can still scrape my driveway without digging in if I keep the bucket level. All the bolt-on toothbars I found use shanks with a much larger drop so that the teeth are below the bucket edge, which is what made me decide to go the weld-on route.
