Spray on coating to protect FEL bucket?

[/pine]

If the intent is to keep a new machine as pristine as can be expected with some effort...I suggest always wearing gloves when operating the tractor...
Even if the tractor is stored out of direct sunlight the acid in our skin will cause the color in the control knobs to fade or discolor...Of course the vinal seat cover is a must...


I almost forgot.. rhino etc. coating the inside of a loader bucket?...C'mon...unless the machine is only used inside wharehouse loading foam pellets out of a plastic lined bay...it is not logical...

 

[jejeosborne]

I have yet to see the obvious answer. The first thing you should do when you get your tractor is to remove all the paint from the entire tractor and polish the steel. Doing this will eliminate the possibility of any scratches or chips all together. The ONLY disadvantage of doing this is you will need to invest in some very good sunglasses to protect your eyes from the reflection.

 

[mandylee216]

Tractors are meant to have scratches and dirt, so I guess there's no need to coat the FEL bucket.

 

[fishpick]

I'm utterly amazed that there are 3 pages of actual responses and only about 1 page of fun poking... at the same time - I can't believe I have no additional fun poking content to add...