Starting problem gt2544

   / Starting problem gt2544 #1  

tracyguy

New member
Joined
Apr 18, 2016
Messages
2
Location
tracy,iowa
Tractor
GT 2544
Mowed with my tractor and shut it off to clean and then would not start. Starter not turning/engaging but there is power to the starter. There's a clicking sound from under the dash coming from a relay, is this the problem?
 
   / Starting problem gt2544 #2  
Check the battery with a load tester. Look for loose wires.
Sounds like the relay is engaging just not enough power getting to the solenoid.
 
   / Starting problem gt2544
  • Thread Starter
#3  
Thanks will try that.
 
   / Starting problem gt2544 #4  
You can take a jumper cable and connect one end on the positive battery post. Touch the other end to the large starter terminal. This will bypass the ignition switch and relay and tell you if the starter works.

Bob B.
 
   / Starting problem gt2544 #5  
Update, please.

What was the cause?
 

Tractor & Equipment Auctions

2021 TAKEUCHI TL8R2 SKID STEER (A51242)
2021 TAKEUCHI...
2002 International 4400 SBA 4x2 Flatbed Truck (A49461)
2002 International...
2019 CATERPILLAR 259D SKID STEER (A51242)
2019 CATERPILLAR...
Case 721B (A47384)
Case 721B (A47384)
2018 Nissan Versa Sedan (A50324)
2018 Nissan Versa...
UPDATED INTERNET BUYER'S PREMIUM TERMS (A50775)
UPDATED INTERNET...
 
Top