shawn092080
New member
hi, i'm new to forum i have a ford 3000 tractor with the selecto speed trans. I had to replace the seals in the stearing column and can't find anything to tell me exactly what type of fluid i need to put back in it.
steering fluid question
- Thread starter shawn092080
- Start date
- Views: 918
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 16,336
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
:welcome: to TBN from Ohio. Post this in the Ford forum
mguitas
Super Member
- Joined
- Aug 22, 2011
- Messages
- 8,080
- Location
- Schuylkill County Pennsylvania
- Tractor
- Massey Ferguson 1423 Hydrostat
:welcome:
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
put in a utf meeting m2c134 spec ( hust about all of them do.
In reality. a good pump and seals would likely run on anything from atf to real 'ps' fluid, to 10w30 engine oil all the way up to 30w engine oil.. and most of the iso 32/46/64 plain hyd oils, including straight jack oil.
it's just not a real picky system.
go with utf..... you can top the sos off with it too.. etc
In reality. a good pump and seals would likely run on anything from atf to real 'ps' fluid, to 10w30 engine oil all the way up to 30w engine oil.. and most of the iso 32/46/64 plain hyd oils, including straight jack oil.
it's just not a real picky system.
go with utf..... you can top the sos off with it too.. etc
Briana03
Elite Member
Welcome to TractorByNet!
I moved your thread to the Oil, Fuel, & Lubricants forum.
I moved your thread to the Oil, Fuel, & Lubricants forum.
