Hi guys I've got a cub 1250 and it's not getting gas , so I took the carb apart and saw that when the float drops down the needle valve stays stuck in place and dose not allow any gas to come in . I have cleaned the carb and put it back together and the valve is still sticking not sure what to do ?
Sticking needle valve
- Thread starter The Cub
- Start date
- Views: 3669
oldnslo
Super Member
Get a new needle and seat for the carb. Over time these are wear items and they tend to wear out faster due to the ethanol in fuel today.
Bob_Bainbridge
Platinum Member
The 1250 feeds gas by gravity so there isn't much fuel pressure to force a sticking needle valve open. Some needles have a rubber tip which can deteriorate, especially with ethanol.
Bob B.
Bob B.
Thanks guys for the info , my problem now is that I cant find any parts for my carb it's a walbro 52 . All the parts dealers in my area say that they need the model number off the motor in order the get parts for the carb . Thing is that the tag with the model number on the motor is no longer there
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
I don't believe the seat can be replaced as it is machined into the carb.
Here is the parts for the 52 series carb. Not sure which one you have. Number should be stamped on the carb.
Walbro HDA-52-1 Carburetor Parts
Walbro WY-52-1 Parts List and Diagram : eReplacementParts.com
Walbro HDA-52-1 Parts List and Diagram : eReplacementParts.com
Excerpt:
Not compatible with E-20 or E-85 ethanol fuel.
Here is the parts for the 52 series carb. Not sure which one you have. Number should be stamped on the carb.
Walbro HDA-52-1 Carburetor Parts
Walbro WY-52-1 Parts List and Diagram : eReplacementParts.com
Walbro HDA-52-1 Parts List and Diagram : eReplacementParts.com
Excerpt:
Not compatible with E-20 or E-85 ethanol fuel.