Stump grinders ??

   / Stump grinders ?? #1  

Vineyard Dave

Member
Joined
Dec 10, 2009
Messages
35
Location
Currently Utah, moving back to Illinois soon.
Tractor
Still shopping. Seriously looking at a Branson 4720h.
Does anyone know of or can reccomend a good stump grinder that works well on a 4720, 3pt, PTO ?

I'll be clearing a lot of timber next year and will need a good one.
 
   / Stump grinders ?? #2  
Save your machine for other work. Find running up the hours for certain things not worth it.

Recommend finding a rental yard with a good sized portable stand-alone Vermeer. Used one a couple of years back and cleared up large area harvested for firewood in less than a day.

Don't waste your time with smaller units.
 
   / Stump grinders ?? #3  
Does anyone know of or can reccomend a good stump grinder that works well on a 4720, 3pt, PTO ?

I'll be clearing a lot of timber next year and will need a good one.

Woods makes a nice grinder for 25-50HP tractors, around $4000. Requires two remotes. I sold one to a customer recently on a 25HP tractor and had to test it myself before delivery :D. I did about ten 12" stumps in about an hour. Then I did a 36" stump and it took way longer since the grinder wheel is relatively small it took several passes. It may have taken an hour to do that one, but with practice I could see that time reducing. It is quicker than digging out stumps and makes a much smaller mess.
 
   / Stump grinders ?? #4  
It would be nice to own a grinder of some sort....
I did rent a nice one a few years back took about 20 stumps out,
10-30 in's
Cost was $100 for 4 hr's or $200 for 24 hr's
A nice grinder will eat up a lot of stumps in 24 hr's.

Gene
 
   / Stump grinders ?? #5  
I have the woods and run it on my 4720, It works very well, If you have any questions feel free to PM me. I use mine for a stump grinding Bus, so it gets ALOT! of work!!

Bob
 
   / Stump grinders ?? #7  
So how did you make out with the stump grinder? What did you finally decide on?
 
   / Stump grinders ??
  • Thread Starter
#8  
I'm still looking into it. I took a look at Woods website and requested some information. They look the best to me so far. I need to see if there is a dealer nearby and go get a hands on look at one. I probably won't make the purchase till next spring.

Thanks Bob.
 

Tractor & Equipment Auctions

PALLET OF NEW HOLLAND PARTS (A51248)
PALLET OF NEW...
2018 INTERNATIONAL 4400 SBA 4X2 SERVICE TRUCK (A51406)
2018 INTERNATIONAL...
2024 JOHN DEERE 8R 280 LOT NUMBER 8 (A53084)
2024 JOHN DEERE 8R...
2006 UTILITY VS2RA 53 FT REEFER TRAILER (A52577)
2006 UTILITY VS2RA...
2019 JGL 2632ES 26ft Electric Scissor Lift (A50322)
2019 JGL 2632ES...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top