Stump grinders ??

   / Stump grinders ?? #1  

Vineyard Dave

Member
Joined
Dec 10, 2009
Messages
35
Location
Currently Utah, moving back to Illinois soon.
Tractor
Still shopping. Seriously looking at a Branson 4720h.
Does anyone know of or can reccomend a good stump grinder that works well on a 4720, 3pt, PTO ?

I'll be clearing a lot of timber next year and will need a good one.
 
   / Stump grinders ?? #2  
Save your machine for other work. Find running up the hours for certain things not worth it.

Recommend finding a rental yard with a good sized portable stand-alone Vermeer. Used one a couple of years back and cleared up large area harvested for firewood in less than a day.

Don't waste your time with smaller units.
 
   / Stump grinders ?? #3  
Does anyone know of or can reccomend a good stump grinder that works well on a 4720, 3pt, PTO ?

I'll be clearing a lot of timber next year and will need a good one.

Woods makes a nice grinder for 25-50HP tractors, around $4000. Requires two remotes. I sold one to a customer recently on a 25HP tractor and had to test it myself before delivery :D. I did about ten 12" stumps in about an hour. Then I did a 36" stump and it took way longer since the grinder wheel is relatively small it took several passes. It may have taken an hour to do that one, but with practice I could see that time reducing. It is quicker than digging out stumps and makes a much smaller mess.
 
   / Stump grinders ?? #4  
It would be nice to own a grinder of some sort....
I did rent a nice one a few years back took about 20 stumps out,
10-30 in's
Cost was $100 for 4 hr's or $200 for 24 hr's
A nice grinder will eat up a lot of stumps in 24 hr's.

Gene
 
   / Stump grinders ?? #5  
I have the woods and run it on my 4720, It works very well, If you have any questions feel free to PM me. I use mine for a stump grinding Bus, so it gets ALOT! of work!!

Bob
 
   / Stump grinders ?? #7  
So how did you make out with the stump grinder? What did you finally decide on?
 
   / Stump grinders ??
  • Thread Starter
#8  
I'm still looking into it. I took a look at Woods website and requested some information. They look the best to me so far. I need to see if there is a dealer nearby and go get a hands on look at one. I probably won't make the purchase till next spring.

Thanks Bob.
 

Tractor & Equipment Auctions

2023 LMC H40024 LOT NUMBER 190 (A53084)
2023 LMC H40024...
IMPORTANT PLEASE READ!!!! TERMS AND CONDITIONS (A51572)
IMPORTANT PLEASE...
(1) HD 24ft Free Standing Corral Panel with 7ft Gate (A51573)
(1) HD 24ft Free...
2024 CATERPILLAR 255 SKID STEER (A51246)
2024 CATERPILLAR...
2010 Chevrolet Malibu LTZ Sedan (A51694)
2010 Chevrolet...
2018 FORD F-150 XL CREW CAB TRUCK (A51406)
2018 FORD F-150 XL...
 
Top