Super 66 NH Baler...again

[grainger12002]

The NH site offers little around the area where the chain connects,does anyone have a 66 model that is in one piece,or maybe a pic...I would be greatful for any direction.

Thanks again

 

[zzvyb6]

There are service and parts manuals on eBay for this model baler at this very moment. Under $20.00. If you are not an eBayer, maybe it can be fetched another way. If you can be more specific about the exact area in question, I have off this week, maybe I can find one around here and get you some pix. Convention is: tongue is forward, left side is plunger side. Now where on this layout is the chain stuff you are missing? Are you near a TSC (Tractor Supply Co) or equivalent? They have a lot of chain, idlers, breakers, stretchers and links. If its just a tensioner, use a tie strap and a pully for now. Better yet, find the missing part(s) in the field. They can't be too far from where it quit.

You are missing some great hay makin' opportunity.

 

[zzvyb6]

You sayin your parts are not in this image?

see attached.

 

[grainger12002]

Yes,tehy certainly are. I need 10B and number 11, at least thats waht it looks like,do you have the part number ??

 

[zzvyb6]

Here you be:

10 32286 CHAIN Chain, Wad Board, Driven, Roller, #50
10A 25819 LINK, OFFSET Link, Offset, RC 2050
10B 86977795 LINK, CONNECTING Roller, RC 2050, Cotter Style
11 32287 SUPPORT Wad Board Arm