peterssj4034
Bronze Member
I have a NH T2320 (12x12, open platform), which is essentially the TC45DA from the previous model years (I think the T2320 naming scheme is the year or two in between the 45D/C naming and the Boomer series naming schemes). Anyway, the fenders are plastic/fiberglass and junk, they have been cracked almost since I bought the tractor new in 2010. I acquired some more land and started a hay business, which is going well, so the tractor is getting much more use than it it did when I was just using it to maintain my property. It's been and absolute workhorse in the new farming venture (along with a T4.95) and it is time to replace the fenders.
I found a few Boomer 50s at salvage yards, and was curious if anyone had used them to replace the fenders on a comparable NH tractor to the T2320? One yard sent me some pictures (attached), the bolt pattern looks close, and I think they are listed as a cross reference for the T2320. Before I make a decision on them, I thought I would ask the collective group here first for their thoughts and experience.
I found a few Boomer 50s at salvage yards, and was curious if anyone had used them to replace the fenders on a comparable NH tractor to the T2320? One yard sent me some pictures (attached), the bolt pattern looks close, and I think they are listed as a cross reference for the T2320. Before I make a decision on them, I thought I would ask the collective group here first for their thoughts and experience.
Attachments
Last edited:
