DaryleD
Silver Member
I have a leaky loader valve on the NH TC30, 7308 NH loader. It is leaking from the set screw/nut that adjusts the pressure for the loader. It is leaking all the time, even when the loader is not under load. I tried tightening it, but it didn't work. Is there an O-ring behind the set screw that could be leaking, or do I have to buy a whole new valve? I am also wondering what the procedure would be to make sure that I have the correct loader pressure? That is, if I have to take the screw/nut assembly out to replace an o-ring or something. Thanks folks.
Daryle.
Daryle.