nickel plate
Veteran Member
I have a 2002 TC40S, the "S" means the standard model-12x12 manual transmission with a shuttle shift lever and the hour meter just turned 600 hours.
I bought it new for a little over $17000.00 which included the 16LA FEL, R1 tires, 4WD and a six foot box scraper.
There was a frequent issue on the later model TC40 where the plastic fenders were cracking around the handrail mounts. The 2002 models with their original handrail design were not involved.
This is my second and last tractor as I'm 100% happy with it.
Equipment that I've added:
hydraulic spools
BH90-X backhoe
bucket grapple
wood splitter
York rake
Bush Hog
bucket teeth
grille guard
top and tilt
loaded tires
I bought it new for a little over $17000.00 which included the 16LA FEL, R1 tires, 4WD and a six foot box scraper.
There was a frequent issue on the later model TC40 where the plastic fenders were cracking around the handrail mounts. The 2002 models with their original handrail design were not involved.
This is my second and last tractor as I'm 100% happy with it.
Equipment that I've added:
hydraulic spools
BH90-X backhoe
bucket grapple
wood splitter
York rake
Bush Hog
bucket teeth
grille guard
top and tilt
loaded tires