meanstreak
Silver Member
my tc45d will not return neutral. i have to jam the into neutral to make it stop any suggestions? i was using the loader at the time. the peddels also feel spongy.
tc45d
- Thread starter meanstreak
- Start date
- Views: 1036
- Status
PineRidge
Super Member
You may have a common problem relating to the D model hydro. see this link hydro won't stop
Welcome aboard!
Welcome aboard!
Welcome to TBN. I don't know the problem with that model, and I don't have time to read the thread Mike just posted, but I had a similar sticking problem on my CK20HST. A good spraying of all the linkage with WD40 or PB Blaster takes care of it on mine. I do it every 50 hours or as needed, and I've never had a problem again. I hope yours is as simple a fix. John
- Status