TC55DA - Priced

[meledward23]

TC55da - Bumper,Canopy - $19,370
Loader 18LA , Quick Attach, Bucket & Forks - $5,250
**** - They are NH heavy forks, 72" heavy bucket

Rotary Mower 954B $1,850
*** 6' Model

That puts it at $26,470 with 3.9% Finance

Good, Bad, Ugly ?

 

[jinman]

I'm sure that's a good price on the tractor.

Just a little info would help on the other items. Is the mower 5', 6', or 7'? The website lists all three and either a 60 hp or 80 hp gearbox depending on size.

Are the loader forks NH or some other brand? I thought your loader was a little on the high side until I noticed the forks were included.

 

[meledward23]

Updated above...

brief:

6' 954b Rotary Cutter.

Forks are NH heavy Duty Skid Steer model Broken down as $ 600.00

 

[jinman]

Here's my "take" on your prices:

4WD Tractor - about 25% off full retail ( if tractor is loader ready)
Loader and Forks - full retail (if tractor is loader-ready, otherwise with loader control valve and mounting hardware, I'd say about 15% off retail)

Mower - a whopping 35% off MSRP.

If I'm right, your tractor was not ordered "loader-ready" and the dealer has to install all loader components. That's what makes the loader price look high.

Overall, I think you have a pretty good quote, but maybe someone with more accurate info will give you some feedback too. /forums/images/graemlins/smile.gif

 

[AndyMA]

Which trans does it have?


Andy

 

[meledward23]

12 x 12 Synchro Shuttle Shift (SSS) transmission

Saw no reason to pay extra for the EHSS. My foot works fine. And it has great wiring to my brain.

Most of my experience with machines has been with Hydro's , primarily Skid Steers and a smaller Kubota Tractor. But that 12x12 SSS transmision is nice. I Demod one for a weekend (one ten hour day, and 6 hours the next). I decided I can deal without the EHSS or Hydro.

 

[JayC]

How much does the EHSS add to the price?

 

[AndyMA]

</font><font color="blue" class="small">( Saw no reason to pay extra for the EHSS. My foot works fine. And it has great wiring to my brain. )</font>

Having the ESS on both my 2120 and TN75D, I would seriously consider getting it. It's not just the knee, it's the fact that you can shuttle from forward to reverse without stopping (and at reasonable speed) and it is fully modulated. If you do any loader work I think you will regret not getting it. It is also easier on the clutch and transmission.

Andy

 

[froggy]

Just about $1,000 at retail before any discounts.

 

[froggy]

That is one heck of a good price. I would grab it.