Telescoping Stabilizer Bars

[1Lawman]

I have a John Deere 5093E with the factory chain and threaded stabilizers on the rear implement hookup..I want to replace those with solid stabilizer bars made from telescoping tubular steel that uses holes and pins but I do not want to pay $700.00 for John Deere..Anyone have better options? Thanks

 

[M5farms]

I have a John Deere 5093E with the factory chain and threaded stabilizers on the rear implement hookup..I want to replace those with solid stabilizer bars made from telescoping tubular steel that uses holes and pins but I do not want to pay $700.00 for John Deere..Anyone have better options? Thanks

Use the square build your own pto shaft stock that most farm stores sell . drill press and some welding and your set

 

[Zebrafive]

My JD 6415 only came with one. I found a second one on eBay for less than $200 shipped. Probably aftermarket, but looks just like the JD one I have.

 

[1Lawman]

build your own

:laughing::laughing::laughing::laughing:

 

[aczlan]

Look up Mark Hodge. He makes them aftermarket. We have a set of his on our Kubota B7500 and they work very well. He is a member on here but I'm not sure how active he is.

Aaron Z

 

[1Lawman]

thanks

 

[MtnViewRanch]

I have a John Deere 5093E with the factory chain and threaded stabilizers on the rear implement hookup..I want to replace those with solid stabilizer bars made from telescoping tubular steel that uses holes and pins but I do not want to pay $700.00 for John Deere..Anyone have better options? Thanks

Get me a pin-pin distance with an implement attached. I can probably get you a GOOD set for about $200.

 

[1Lawman]

Get me a pin-pin distance with an implement attached. I can probably get you a GOOD set for about $200.

PM sent..THANKS!!

 

[SPYDERLK]

Get me a pin-pin distance with an implement attached. I can probably get you a GOOD set for about $200.

Hi Brian. Does this apply to other tractors, such as the Kubot L's or only the OPs JD?

- - I have high regard for your assessment of GOOD since you have a Mahindra 7520. - -​

 

[MtnViewRanch]

Hi Brian. Does this apply to other tractors, such as the Kubot L's or only the OPs JD?

- - I have high regard for your assessment of GOOD since you have a Mahindra 7520. - -​

Larry, I have access to a few different stabilizers. I do not want to get into building these things, I have no time to custom build these. But if I can help someone out using off the shelf parts with maybe a couple of minor modifications, I will.

These parts come from Europe and are VERY heavy duty. I would say that they are much stronger than the stabilizers on our 7520s, but do not have the wide range of adjustment that the 7520 units have.

If you want to consider something, best to fill out the contact page on my website.