My question is what is the correct procedure to check hydraulic level in the tank on a Terramite TC5. The fill cap is threaded with the dipstick on the end and is the level read by placing the threaded cap on the tank or should it be screwed in tight and then unscrewed to read level? The difference in those two ways of doing it can result in a level difference of about 1/2 on the dipstick level.
Terramite TC5
- Thread starter Mndigger
- Start date
- Views: 4158
N2DFire
Platinum Member
Couldn't find the procedure but page 5 of the Parts Diagram shown the correct position of all the hydraulics for checking the fluid level.
http://terramite2.aronfield.com/T5C-Parts-Manual.pdf
Also an older thread here indicates that if you contact Terramite that you can get the owners manual for your machine (for free)
http://www.tractorbynet.com/forums/terramite/182389-new-t5c-owner.html
Sorry it's not the answer you were looking for but I hope it at least helps.
http://terramite2.aronfield.com/T5C-Parts-Manual.pdf
Also an older thread here indicates that if you contact Terramite that you can get the owners manual for your machine (for free)
http://www.tractorbynet.com/forums/terramite/182389-new-t5c-owner.html
Sorry it's not the answer you were looking for but I hope it at least helps.
