Thank you all from Gramps

[Gramps in NM]

I know I have another thread going and need all the help I can get but I just wanted to pass on this word. THANKS ALL. In trying to learn as much as I can and going thru my machine as I do yesterday I checked the injector pump for oil as has been recomended. Well, it did not seem to have any oil, found the drain plug and pulled it and got about 1- 2 oz. out . It is now full of 30wt, so a BIG thanks to all who have responded to my posts.

 

[Diamondpilot]

Glad you are learning and we could help. I know twice as much about my machine after finding this site also.

Chris

 

[Smalljobs]

Hi Gramps,
I'm glad you are learning...same as me, also a Gramp. You wrote the pump was "full". There is a drain and a filler but also a level screw on the side.

I remove the drain and the fill and the other "level screw". Then I fill it until the level screw stops dripping. After a while it finally stops dripping and I close it up. You can fine online this level screw.

Good luck!

 

[Smalljobs]

Hi Gramps,
I'm glad you are learning...same as me, also a Gramp. You wrote the pump was "full". There is a drain and a filler but also a level screw on the side.

I remove the drain and the fill and the other "level screw". Then I fill it until the level screw stops dripping. After a while it finally stops dripping and I close it up. You can find online this level screw.

Good luck!