DAP
Veteran Member
- Joined
- Nov 28, 2001
- Messages
- 1,180
- Tractor
- JD LX288 and a B7800
I really didn't have much use for a mid-PTO until I realized that the B7800 folding ROPS are included with the mid-PTO ...
Although the picture may distort some, there's about 2 inches between the gray paint and a 200 yo floor beam ... about 2 inches between the left fender and 3 cords of split hardwood on the left, and on the right, there is about 3 inches between the loader bracket and a John Deere LX288 .... The loader clears the door by about a foot ... no sweat!
Those handles in the foreground belong to an hold hand tiller I've keep around as a display item....
Although the picture may distort some, there's about 2 inches between the gray paint and a 200 yo floor beam ... about 2 inches between the left fender and 3 cords of split hardwood on the left, and on the right, there is about 3 inches between the loader bracket and a John Deere LX288 .... The loader clears the door by about a foot ... no sweat!
Those handles in the foreground belong to an hold hand tiller I've keep around as a display item....