Things I have done.

   / Things I have done. #1  

oakglen01

New member
Joined
Jan 15, 2022
Messages
3
Location
Fairfax, Iowa
Tractor
kubota / B2620
front hitch, side step, 3 point hitch, light bar and shorten 5 inch, pos tack step, seat cover, front weights, 1.5 wheel spacers weighted rear tires, spinner knob, snow skeds and lift points.
 

Attachments

  • 20211123_100412.jpg
    20211123_100412.jpg
    2.2 MB · Views: 490
  • 20211123_100427.jpg
    20211123_100427.jpg
    1.7 MB · Views: 505
  • 20211123_100441.jpg
    20211123_100441.jpg
    1.9 MB · Views: 425
  • 20211123_100448.jpg
    20211123_100448.jpg
    2.1 MB · Views: 427
  • 20211123_100514.jpg
    20211123_100514.jpg
    2 MB · Views: 413
  • 20211214_084842.jpg
    20211214_084842.jpg
    2.4 MB · Views: 446
  • 20211214_084905.jpg
    20211214_084905.jpg
    2.3 MB · Views: 398
  • 20220115_073615.jpg
    20220115_073615.jpg
    2.1 MB · Views: 419
  • 20220115_073633.jpg
    20220115_073633.jpg
    1.6 MB · Views: 401
  • 20220115_073643.jpg
    20220115_073643.jpg
    1.8 MB · Views: 503
   / Things I have done. #2  
I also couple things on our B2650 this year.
Bucket guard has come in handy number times.
 

Attachments

  • 4.JPG
    4.JPG
    2.4 MB · Views: 297
  • 14.JPG
    14.JPG
    1.8 MB · Views: 406
  • 15.JPG
    15.JPG
    1.9 MB · Views: 300
  • Rec 2.jpg
    Rec 2.jpg
    432.8 KB · Views: 299
   / Things I have done. #3  
My NH is a bit higher than my Yanmar, so I've been thinking about adding a step as well. Along with a light bar. Winter is upon us, so I have all winter to plan.
Great work guys...
 
   / Things I have done. #4  
Oakglen is your 3point hitch thing welded to the drawbar ? Or maybe just bolted ?
After seeing so many tractors with damaged front grills I have been seriously considering modifying the grill guard on my LS
 
   / Things I have done. #5  
I also couple things on our B2650 this year.
Bucket guard has come in handy number times.

Making stuff is just as much fun as operating !

Thomas where do you have those receivers mounted ? What are they for - forks maybe ??
 
   / Things I have done. #6  
Making stuff is just as much fun as operating !

Thomas where do you have those receivers mounted ? What are they for - forks maybe ??
Yes sir it is.... I'm sure have come up some good to great ideas over the years...care to share some pics from over the years.
 

Attachments

  • 10.JPG
    10.JPG
    2 MB · Views: 260
   / Things I have done.
  • Thread Starter
#7  
Oakglen is your 3point hitch thing welded to the drawbar ? Or maybe just bolted ?
After seeing so many tractors with damaged front grills I have been seriously considering modifying the grill guard on my LS
welded
 
   / Things I have done. #8  
I like your front wheel weights. I might have to look into doing that on my tractor. Are they factory or something you made work?
 

Tractor & Equipment Auctions

2014 INTERNATIONAL MA025 26FT NON CDL BOX TRUCK (A51222)
2014 INTERNATIONAL...
CATERPILLAR 279D3 SKID STEER (A51242)
CATERPILLAR 279D3...
2018 INTERNATIONAL 4400 4X2 EXT CAB SERVICE TRUCK (A51406)
2018 INTERNATIONAL...
2015 Freightliner Ambulance (A50323)
2015 Freightliner...
John Deere X740 Mower (A50514)
John Deere X740...
2017 FREIGHTLINER CASCADIA 126 SLEEPER TRUCK (A51222)
2017 FREIGHTLINER...
 
Top