Omega Woods
Platinum Member
- Joined
- Mar 7, 2016
- Messages
- 610
- Location
- Soddy Daisy, TN
- Tractor
- Branson 4520R, Kubota BX2380, Kubota RTV-X110C, Bobcat E50, ASV RT-50
I feel kind of dumb about this but I'm sure I'm not the only person this has happened to, so I thought I'd pass it along.
I took off my backhoe today. Put the three-point arms back on. Moved the lever forward to lower the arms and hook up my landscape rake. Nothing. Stood on the arms. Nothing. Jumped up and down a bit. Tractor off. Disconnected the hydraulic connector and reconnected it. Nothing. Restarted tractor, moved lever back and forth several times, got flashlight to look at mechanism.
Panic ensued and I pulled out my phone to consult TBN. Then it occurred to me that I hadn't checked the speed adjuster under the front of the seat. Turned it in the "Fast" direction a little. Arms dropped immediately. Had a mini celebration :cool2: and went about my day.
So, if your 3 point gets stuck, take a look at that little knob early in your troubleshooting, you might save yourself a panic attack.
I took off my backhoe today. Put the three-point arms back on. Moved the lever forward to lower the arms and hook up my landscape rake. Nothing. Stood on the arms. Nothing. Jumped up and down a bit. Tractor off. Disconnected the hydraulic connector and reconnected it. Nothing. Restarted tractor, moved lever back and forth several times, got flashlight to look at mechanism.
Panic ensued and I pulled out my phone to consult TBN. Then it occurred to me that I hadn't checked the speed adjuster under the front of the seat. Turned it in the "Fast" direction a little. Arms dropped immediately. Had a mini celebration :cool2: and went about my day.
So, if your 3 point gets stuck, take a look at that little knob early in your troubleshooting, you might save yourself a panic attack.
