tiller tines from agri supply Fit and wear?

[spruce Deere]

Anyone replace tines on there tiller from agri supply? How was the fit, wear out quick or not, any breakage?

 

[bjr]

Do they have tines for you make and model of tiller? I would suppose you could ask them what quality of steel they're made of. Most of the other products that I've bought from them have been good, I've not bought tiller tines from them. There is a place called tiller blades dot com They were about $3 apiece but had a limited brands of tiller they fit. bjr

 

[spruce Deere]

Thanx for the input on tiller tines.com bjr, agri supply does have tines for my 48 inch maletti. But after scouring the pictures and there specs, tines for a howard E series tiller also match the specs of the tines on my maletti too! It just made me wonder...

 

[spruce Deere]

OOH BOY..... When I bought the tiller, the fella gave me 3 left-hand spare tines. The spare tines I measured for specs must not be for a maletti These belong to a haward E series! Duh.

 

[RodneyB]

Anyone replace tines on there tiller from agri supply? How was the fit, wear out quick or not, any breakage?

Hello spruce Deere,

We wanted to respond to your note on replacement tiller tines for Agri Supply Tillers. We carry different brands of tillovators, Caroni, King Kutter, and Sicma. Unsure what brand you have? We have carried the replacement blades for years and have had very good service with these blades. We do test the hardness and quality of our blades to be be of very good quality. We also guarantee these. If we can be of any furter assistance, feel free to contact us.

Thanks,

Rodney Barbour

Agri Supply

 

[spruce Deere]

Thanks Rodney for the help. The tiller I was lookn for tines is a PL/120/S Maletti. The spare tines I got with the tiller only 3, are not the right ones. I can make them fit, but was more interested in if I could even find tines for the thing. Sorry for the long no responce.

 

[RodneyB]

Good afternoon,

We do stock the tiller blades for the Maletti Tiller. They are our ASC 36059 RH and 36060 LH,. The selling price is $8.49 each. If I can help you any further feel free to contact me.

Thanks,

Rodney Barbour

Agri Supply

 

[fluggies4]

Thanks Rodney for the help. The tiller I was lookn for tines is a PL/120/S Maletti. The spare tines I got with the tiller only 3, are not the right ones. I can make them fit, but was more interested in if I could even find tines for the thing. Sorry for the long no responce.

Also, watch for the tine bolt hole spacing...the older PL tillers had 46mm spacing, the current ones have 40mm.

 

[spruce Deere]

Thanks fluggie. Thats good to know, Mine is a 1978 model.