CalG
Super Member
- Joined
- Sep 29, 2011
- Messages
- 5,570
- Location
- vermont
- Tractor
- Hurlimann 435, Fordson E27n, Bolens HT-23, Kubota B7200, Kubota B2601
The rake has served well for many years buffing up "the hill" that is the drive up to the house.
But the tines are getting so low, the draw bar drags in front before the gage wheels come off the ground in back. (not really, but it's close.)
The rake is a York TA2 6footer.
Looking on line. tines are offered by many at many different price levels. But this rake has tines that are 3/4 inch wide, and 1/4 inch thick. I haven't seen anything but 1"X 5/16" for replacement tines.
I sent York parts department an e-mail. My guess is, it will be quite costly. It may be less just to purchase a new rake from TSC.
Anyone know of a source ? I only need 38 of the suckers.
But the tines are getting so low, the draw bar drags in front before the gage wheels come off the ground in back. (not really, but it's close.)
The rake is a York TA2 6footer.
Looking on line. tines are offered by many at many different price levels. But this rake has tines that are 3/4 inch wide, and 1/4 inch thick. I haven't seen anything but 1"X 5/16" for replacement tines.
I sent York parts department an e-mail. My guess is, it will be quite costly. It may be less just to purchase a new rake from TSC.
Anyone know of a source ? I only need 38 of the suckers.
