oinkerfarmer
New member
While running a brush hog at 2200 rpms (540 on the pto), oil began coming out of the breather. I took the breather off and could feel no blowby, but oil does come out. Could oil not be draining back to the pan? I use Rotella synthetic, I had a sample run when it did this a year ago and it showed normal break in metals only. (120 hours) It hardly ever even moves the temp off of cold, this time went up about a quarter of the gage ( it was 55 degrees outside and the gage got nowhere near hot) and it started producing oil from the breather. Other than this, it runs perfect, uses no oil. Any suggestions out there?