DCS
Bronze Member
Just got my new King Kutter mower today and installed on my tractor. Now, I'm wondering, should you let the mower float and not float.
To float or not to float
- Thread starter DCS
- Start date
- Views: 874
RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,902
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
If you have a finish mower with rollers that keep it at the right height, you'll want to float it. This means leave your lift control in the "down" position.
If you have a brush hog with its front height set by the lift, you have to run it down to the height you want and then reset the lift control to neutral. It can float up from that position but not down.
Ralph
If you have a brush hog with its front height set by the lift, you have to run it down to the height you want and then reset the lift control to neutral. It can float up from that position but not down.
Ralph
billbill1
Veteran Member
- Joined
- Oct 13, 2004
- Messages
- 1,207
- Location
- Lecompton, Kansas
- Tractor
- 2016 Mahindra 1533 Shuttle AgKing 2840 shuttle shift
KK RFM's have a floating top link and follow the ground, run it in float.
