took delivery of a BX1870 yesterday

   / took delivery of a BX1870 yesterday #11  
Nice. Congrat's. I had forgotten the 70 series all have folding ROPS. I thought for a second they dropped you a BX25D without the hoe by mistake. Enjoy.
 
   / took delivery of a BX1870 yesterday
  • Thread Starter
#12  
Nice. Congrat's. I had forgotten the 70 series all have folding ROPS. I thought for a second they dropped you a BX25D without the hoe by mistake. Enjoy.

I couldnt be that lucky lol
 
   / took delivery of a BX1870 yesterday
  • Thread Starter
#13  
I took the MMM off tonight and gave it a coat of wax, an i goofey? or is there others that would do the same
 
   / took delivery of a BX1870 yesterday #14  
I took the MMM off tonight and gave it a coat of wax, an i goofey? or is there others that would do the same

There are others here that wax their tractors, but that doesn't mean you aren't goofey! LOL

Sent from my iPad using TractorByNet
 
   / took delivery of a BX1870 yesterday #15  
Nice new BX, you're gonna enjoy it.
 
   / took delivery of a BX1870 yesterday #16  
Ok. Be honest. How many times did you go out to the garage to just look at it?? I have had ours a little over two months and I still do it... A few time s a day!!

Great tractors! You will put it to good use.

As far as the waxing thing...I didnt do that to mine but only because it was so darn cold in the garage and the deck was used immediately so it had lots of grass on it!
 
   / took delivery of a BX1870 yesterday #17  
And did you remember to lower your ROPS the first time pulling into the garage? :eek:
 
   / took delivery of a BX1870 yesterday
  • Thread Starter
#18  
I do glance at it quite a bit, i find my self trying to think of things i can do with it just to drive it around. yesterday i road around picking up sticks, then ran it around rolling the yard.
my garage door is 10' high so no issue there. I havent tryed to put it in the shed yet but i do have the ROPS folded do to clearing my clothes lines today we are welding/making one of these for it.Flexpoint 3-Pt. Hitch Adapter — Category 1 and 2, Model# FPHS-1 | 3-Point Hitch Adapters| Northern Tool + Equipment
 
   / took delivery of a BX1870 yesterday
  • Thread Starter
#19  
Ok here is what we made, I put a regular hook on it , a chain grab hook and a D ring.

we can make them if any one wants one.
 
   / took delivery of a BX1870 yesterday #20  
Looks good.
 

Tractor & Equipment Auctions

2004 TerraGator 8104 (A53473)
2004 TerraGator...
2017 Freightliner M2 Cab & Chassis (A53117)
2017 Freightliner...
Atlas Copco XAS 375 (A50123)
Atlas Copco XAS...
John Deere 772-A Grader (A52384)
John Deere 772-A...
2020 INTERNATIONAL LT625 TANDEM AXLE SLEEPER (A53426)
2020 INTERNATIONAL...
2012 UNVERFERTH 15-INCH REAR SPACERS FOR 10 BOLT HUB (A53473)
2012 UNVERFERTH...
 
Top