Tool Box for NH TC40A
- Thread starter Ducks
- Start date
- Views: 11149
dknarnd
Gold Member
mikim....Does that bracket just bolt onto the plastic vender? Would a person be able to attach an ammo can to that bracket in the same fashion as that plastic box does? Does the box sit down onto the bracket (with a pad between the box bottom and bracket)?
I can imagine the plastic box not holding up well with tools and stuff bouncing around in it. Have you had any issues with your since you installed it?
I can imagine the plastic box not holding up well with tools and stuff bouncing around in it. Have you had any issues with your since you installed it?
mikim
Veteran Member
The drink holder for the right fender is just a piece of flat with 2 holes cut in it. I assume you are suppose to put a cup through the holes and let them sit on the fender ...BUT the fender is severely sloped right there and there's no way a cup will sit. I guess if you found a cup that would fit in the hole but not hit the fender it would work...... I plan on using it for some sort of toolbox .... not sure what yet. The 45D vertical toolbox I bolted to the left fender works quite well ... I use it for chains. The cup holder on it isn't the best either.
Would a cup holder work anywhere on a tc? I love my tractor but the ride is the only thing lest to be desired. I think my next purchase will be a kidney belt.
Jim, You could bolt an ammo can there but you will have to make a bracket to compensate for the slopes in the fender.
Jim, You could bolt an ammo can there but you will have to make a bracket to compensate for the slopes in the fender.
