Toolbox for NH Workmaster 40

   / Toolbox for NH Workmaster 40 #1  

MiserableOldFart

Platinum Member
Joined
Jun 27, 2006
Messages
544
Location
Delaware County Catskills NY
Tractor
NH Workmaster 40, Kubota GR2120
Used a cheap plastic ammo box, bottom reinforced with plywood inside and glued. L bracket and piece of 2x4 cut to fit underneath to support it if it ever wants to slide down. Obviously need to get shorter bolts and probably, when ambitious, will lower the whole thing a couple inches. The mount is sturdier than I expected, and since even a little lower, it will be hard to see into the box from the ground, likely, also when ambitious, replace with a lower, wider, metal box.
Still it's functional as is, and inboard enough to give it a chance of survival from a tree branch or whatever..
I had to add the $6 hand grip to the right side because, yes, the left side is the correct one for mounting and dismounting, and it's an "economy" tractor and that $6 part would have broke CNH's back, lol. The two rubber plugs were cheaper, I guess.
 

Attachments

  • toolbox.jpg
    toolbox.jpg
    398.2 KB · Views: 271
   / Toolbox for NH Workmaster 40 #2  
👌
 

Tractor & Equipment Auctions

2017 Ram 5500 Valve Placer Bucket Truck with Versalift STP36NE - 41FT Working Height, Low Miles (A52128)
2017 Ram 5500...
2023 BOBCAT 776R SERIES SKID STEER (A51242)
2023 BOBCAT 776R...
CATERPILLAR 305E2CR EXCAVATOR (A51242)
CATERPILLAR...
2025 Swict 78in Bucket Skid Steer Attachment (A50322)
2025 Swict 78in...
1982 LeeBoy Motor Grader (A52128)
1982 LeeBoy Motor...
2016 VOLVO VNL300 TANDEM AXLE DAY CAB (A51222)
2016 VOLVO VNL300...
 
Top