Tools for the 1950 Case D industrial tractor

[dieseldave56]

Thats correct , tools can't do the job without them . I'm in need of the clutch adjustment tools for the 1950 Case DI tractor. I know Harbor Freight does not have them from just reading this forum.
I would appreciate if anyone has personal knowlegde of these two tools or has information leading to the capture of these two desperately need tools. A picture of these aledged tools would also warrant a thanks as well ( my Case manuals are reprints and the pictures are of poor quailty).
Thanks in advance

 

[mojoinco]

Well, split it, measure the diameter of the trans input shaft flutes (inner) and find someone with a wood lathe (you might get lucky and find a common dowel diameter will work). Or, maybe measure the inner diameter of the new clutch and it will probably work.

 

[dieseldave56]

Thanks for the infor on a clutch alignment tool, but what I was after was a clutch adjustment tool. This particular tool is used to depress the spring loaded plunger on the clutch disc. After drepressing this pin , one rotates the adjusting collar slightly to compensate for the disc wear.
I did find a description of the proper tool and will be frabricating shortly. Again , thanks for the responce.