TOPLINK LENGTH

[flINTLOCK]

I'm hoping to order hydraulic toplink from CCM next week, but need to know the length and range of the toplink of TC40DA to make right choice. Any help would be appreciated since my tractor won't be delivered for 2 weeks so I can measure it myself.

 

[Slippy]

I will do it for you, just tell me from where to where to measure. I might be interested in at least the tilt part as well.

 

[flINTLOCK]

End to end, extended and shortened, I guess. Thanks

 

[JerryG]

End to end, extended and shortened, I guess. Thanks

Pin centerlines.

 

[Slippy]

Between pin centers is about 15" retracted and about 20" extended.

 

[flINTLOCK]

5" seems like a short throw??

 

[mboulais]

I'm hoping to order hydraulic toplink from CCM next week, but need to know the length and range of the toplink of TC40DA to make right choice. Any help would be appreciated since my tractor won't be delivered for 2 weeks so I can measure it myself.

Most Cat 1 toplinks have an adjustment ramge of 18 to 24" or there abouts. Subcompacts with a Cat 1 run a shorter toplink. On my Mahindra 4110, I usually have mine screwed in to around 18.5".

 

[flINTLOCK]

The concensus is that 18-26.5" is the right length for TC40DA HTL?? Their next shorter HTL from CCM is 16-22" or so.

 

[flINTLOCK]

The concensus is that 18-26.5" is the right length for TC40DA HTL?? Their next shorter HTL from CCM is 16-22.5".

 

[Slippy]

Opps, I'm sorry, I measured the side arm, not the top link. My bad. I will measure the top link for you. Well, now you have the tilt part anyway.