torque engine cylinder head bolts "yanmar 1610dt"

[srca]

Hello, I have burned the head gasket engine of a yanmar 1610 dt (3T75U-NB model) and once I have the spare, I need the torque of the screws of the head gasket.

Screws in question are:
- 8 screws (hardness 10 M12 x 83mm)
- 3 screws (unknown hardness, M8 x 85mm)

I also need the timing of the intake and exhaust valves.

thanks and regards

(Sorry for my English, is the translator of google)

 

[winston1]

head bolts tighten in stages of 29, 58 and finally 72-79ft lbs. Assist bolts 22ft lbs. valves .008".

 

[srca]

ok thanks winston1

have you Service Manual yanmar 1610 in pdf ??

 

[winston1]

No pdf. What language do you speak? The closest English manual to your 1610 in probably going to be for the ym220/226.

 

[srca]

I am Spanish but in English I can assert

 

[srca]

winston1 can you tell me the equivalence between ft / lbs and newton- meter
and inches - millimeters ??

head bolts
29 ft lbs = ? Nm
58 ft lbs = ? Nm
72 ft lbs = ? Nm
79 ft lbs = ? Nm

assist bolts
22 ft lbs = ? Nm

valves
.008" = ? mm

 

[winston1]

29 = 39.318
58 = 78.637
72 = 97.618
79 = 107.110

Assist 22 = 29.827

.008" = .2032

 

[srca]

ok winston1 a greeting