Trackks9

   / Trackks9 #1  

Trackks9

Bronze Member
Joined
Nov 25, 2004
Messages
87
Location
green bay, wi.
Tractor
pt 418/ IHI mini excavator
Been a while since I posted, what are folk's doing to preheat the hyd. oil tank, my little 418 doesn't like
cold weather, have a little over 1000 hrs doing mainly loader work
 
   / Trackks9 #2  
I have successfully used the magnetic heaters on my PT1850. A heated shop is nicer.

Ken
 
   / Trackks9 #3  
I do nothing. Well, that doesn't help, does it? Sorry :laughing:

I've had the 425 for 13 years. I change the hydraulic filter about once per year. And at each filter change I add 1 qt of Mobil1 synthetic oil. So out 10 gallons or so, I've partially diluted it with 3.5 gallons of synthetic. I also run synthetic in the engine since the first oil change.

I've started well below zero with no pre-heating of the hydraulics or engine. Only an occasional shot of starting fluid.
 
   / Trackks9 #4  
I have an old kerosene heater that I set next to the 422 for at least an hour or so. Usually does the trick and takes the chill off the seat too.
 

Tractor & Equipment Auctions

Great Plains Grain Drill (A50515)
Great Plains Grain...
(INOP) VOLVO L110H WHEEL LOADER (A50459)
(INOP) VOLVO L110H...
2013 INTERNATIONAL MA065 CAB AND CHASSIS (A50854)
2013 INTERNATIONAL...
2018 FORD EXPEDITION (A51406)
2018 FORD...
2012 John Deere 7280R MFWD Tractor (A51039)
2012 John Deere...
NEVER USED FECON 74in Deck Mulcher FDM74 (A51039)
NEVER USED FECON...
 
Top