TRASH/ROCK BUCKET

   / TRASH/ROCK BUCKET #11  
YES! I like that tool! I just may fire up the welder to build one. I recently bought one of the Andy Tatro grapples which would work real nicely with that bucket.

Thanks for the pix

John
 
   / TRASH/ROCK BUCKET
  • Thread Starter
#12  
When I initially took my ideas from the sketch pad to the CAD program, I added a grapple to the design. I thought I would try it in the raw bucket mode for a while before I added another hydraulic circuit for the grapple. After useing it for a while, I don't think I will add a grapple now as I have had very little trouble getting and keeping debris on the forks. The stumps with the really big rootwads can be a little tricky but so far they have all went without me having to leave the seat to hand load the bucket. If I had it to do again, I would configure it to provide a little more rollback with the bucket fully lowered.
 

Tractor & Equipment Auctions

2021 Doosan DX350LC-5 Hydraulic Excavator (A49346)
2021 Doosan...
2001 INTERNATIONAL 4700 (INOPERABLE) (A50854)
2001 INTERNATIONAL...
5K ANNULAR BLOWOUT PREVENTER (A50854)
5K ANNULAR BLOWOUT...
1986 ASPT 30ft S/A Pole Trailer (A49346)
1986 ASPT 30ft S/A...
2017 Ford F-450 Crew Cab Mason Dump Truck (A50323)
2017 Ford F-450...
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A49461)
2019 Allmand...
 
Top