Tree remover

   / Tree remover #61  
RegL said:
Why not tie off 20' up the tree and use it's trunk as the lever as long as it is strong enough.
You know I have done that, but never compared that to the tree remover that we have been discussing. Even with a 20 foot lever (the tree), I cannot pull the tree over without cutting many roots. I used a high lift jack to pull the tree and a comealong. I probably had several thousand pounds on the tree.

With the tree puller, I can apply lift to the tree. I was told by a lumber jack friend that trees are a lot easier to pull up versus sideways. If you think about it, in nature there is very little lifting force on a tree, but most trees see a lot of side forces from wind and are adapted to it. Life is very efficient and does not waste effort on things it does not need.
 
   / Tree remover #62  
BobRip said:
You know I have done that, but never compared that to the tree remover that we have been discussing. Even with a 20 foot lever (the tree), I cannot pull the tree over without cutting many roots. I used a high lift jack to pull the tree and a comealong. I probably had several thousand pounds on the tree.

With the tree puller, I can apply lift to the tree. I was told by a lumber jack friend that trees are a lot easier to pull up versus sideways. If you think about it, in nature there is very little lifting force on a tree, but most trees see a lot of side forces from wind and are adapted to it. Life is very efficient and does not waste effort on things it does not need.

Bob, I know what your saying about trees adapting to their environment, but it's been my experience that on small trees that I can't lift out with the loader, I can easily raise the bucket a ways and push them over.
How about a stouter version of one of these. You would get both lift and pull.


Ideal Alternative to a Tree Spade
 
   / Tree remover #63  
Very interesting. I have to think about this.
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2013 MACK GU (GRANITE) TRI AXLE WINCH TRUCK (A55745)
2013 MACK GU...
JET GH-1660ZX Lathe (A47477)
JET GH-1660ZX...
2022 New Holland C327 Compact Track Loader (A55302)
2022 New Holland...
2012 International 4300 Rollback (RIDE AND DRIVE) (A50775)
2012 International...
96" X 53' FLATBED TRAILER (A52706)
96" X 53' FLATBED...
 
Top