tuff torq model k62

   / tuff torq model k62 #1  

ericbx1500

Gold Member
Joined
Jul 16, 2005
Messages
297
Location
Michigan
Tractor
BX2380, scotts 48
i have a k62 hyd on my tractor with about 400 hours on it. has anybody ever changed the fluid in one of these. is it necessary to do so. i have no problems with it. it uses 10w30 and thought after 6 seasons maybe i should change it /forums/images/graemlins/confused.gif
 
   / tuff torq model k62 #2  
I just changed the oil in a K65, only because the owner said he topped if off with transmission fluid instead of the 5W50 synthetic oil that is supposed to be in it. I don't know if it is necessary to change the oil, but it probably isn't a bad idea. I did notice on the Tuff Torq web site that the K62 uses 2.5 liters of <font color="blue"> J20C Hy-Gard High Viscosity</font> oil. There is a drain plug on the bottom but the fill hole will have to be accessed from under the tractor housing. In my case, I had to remove the seat & unbolt the housing.
 

Tractor & Equipment Auctions

377789 (A51573)
377789 (A51573)
2014 FRAC TANK (A53843)
2014 FRAC TANK...
2009 Kaufman Gooseneck Trailer and 10K Hydro-Blast (A50860)
2009 Kaufman...
2004 Sterling Acterra Cab and Chassis S/A Truck (A54814)
2004 Sterling...
EZGO (A50324)
EZGO (A50324)
2005 FONTAINE 48 FOOT FLATBED (A53843)
2005 FONTAINE 48...
 
Top