scarg
Bronze Member
Attached are images of the horse stall that I unloaded with the PT 422 from a full sized tractor trailer.
The forks just barely reached high enough to pick the pallet-
I then pulled the pallet back and set the end on the ground-
I repositioned perpendicular to the centerline of the trailer and picked the pallet up. The truck driver drove forward and then I set the pallet down.
It was a bit scary staring up at the stall but it wasn't as top heavy as it looks!
Steve
The forks just barely reached high enough to pick the pallet-
I then pulled the pallet back and set the end on the ground-
I repositioned perpendicular to the centerline of the trailer and picked the pallet up. The truck driver drove forward and then I set the pallet down.
It was a bit scary staring up at the stall but it wasn't as top heavy as it looks!
Steve