Used TC21D W/FEL and MMM coming Monday!!!

   / Used TC21D W/FEL and MMM coming Monday!!! #41  
Safety interlocks problems ...
I wouldn't have even considered that on such a low hours tractor!
Really somewhat surprised this could even be an issue since the interlock should be almost bullet proof (just for product liabilty reasons alone).
 
   / Used TC21D W/FEL and MMM coming Monday!!!
  • Thread Starter
#42  
I know what you mean Roy. The dealer knew right away what was going on , so I'm thinking its a pretty common problem. I can live with it for now, but I'm told it could get worse. Adjustment is said to be easy. Thanks for the reply. Kent
 
   / Used TC21D W/FEL and MMM coming Monday!!! #43  
Product liability you say, You should be right. That is if the tractor started any time. The problem is she wont start./w3tcompact/icons/laugh.gif Ya cant get hurt if she wont start!/w3tcompact/icons/wink.gifLarry
 
   / Used TC21D W/FEL and MMM coming Monday!!!
  • Thread Starter
#44  
You're right Larry. Can't shot the gun with no bullets so to speak. Thanks again for the earlier post. Kent
 
   / Used TC21D W/FEL and MMM coming Monday!!! #45  
Product liability you say, You should be right. That is if the tractor started any time. The problem is she wont start. Ya cant get hurt if she wont start

Yeah...but if it can go out of adjustment one way...can't it do the same the other way?

We make a plastic housing for an automotive clutch interlock switch (the switch that requires your clutch be fully depressed to start the car). A minor amount of flash (technically, within the drawing specs) caused some switches to stick (which would allow the vehicle to start without the clutch being depressed). We got nailed big time by our customer...paid for quite a few replacementys and installations.
Reckon any interlock problems making it to the field without being recalled, surprises me...
 
   / Used TC21D W/FEL and MMM coming Monday!!! #46  
Your 100% right. I wasnt hammer'in your comment/w3tcompact/icons/wink.gif
 
   / Used TC21D W/FEL and MMM coming Monday!!! #47  
So, Steelfan...it's been a few days...how's the tractor doing? Are ya getting much seat time? Enjoying it?
 
   / Used TC21D W/FEL and MMM coming Monday!!!
  • Thread Starter
#48  
Hey Roy, Sorry about not updating you gentlemen, but I've been playing Oh I mean working with my Tractor. Also I've got a problem that showed up also. I'm going to post in the owning forum as soon as I finish typing this. I moved a topsoil pile twice, and my wife's compost pile at least three times. Also played( I mean worked) on the driveway. Thanks again for all the help, the PTO levers are definitely the problem with starting, and will be adjusted. Kent
 

Tractor & Equipment Auctions

INOP/NON-RUNNING Chevrolet Rollback (A51572)
INOP/NON-RUNNING...
2011 Homesteader Box Trailer, 6'x10' (A52384)
2011 Homesteader...
2025 New/Unused Wolverine Pallet Fork Frame (A51573)
2025 New/Unused...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2013 FORD F-150 XL EXTENDED CAB TRUCK (A51406)
2013 FORD F-150 XL...
 
Top