Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
I was reading about people making little screens and thought I might share this.
Good for making a little screened soil. Shown Here on my MULE 2510. Built mostly out of angle iron, some bent flat material for the top and expanded mesh.
Handy because it's mobile. Pick stuff up in one place, dump the debris in one spot and the fine material in another. Also, really handy if your bed is powered.
I haven't used it much. For one thing, it's easier if two people put it in place.
If I had to do it again, I might make the screen higher to clear the tailgate when closed.


Good for making a little screened soil. Shown Here on my MULE 2510. Built mostly out of angle iron, some bent flat material for the top and expanded mesh.
Handy because it's mobile. Pick stuff up in one place, dump the debris in one spot and the fine material in another. Also, really handy if your bed is powered.
I haven't used it much. For one thing, it's easier if two people put it in place.
If I had to do it again, I might make the screen higher to clear the tailgate when closed.

