I have a bulldog utv with a Suburu (Robin) eh65 engine. When going over fairly rough cattle guards the engine stalls. Had to sit for 5 minutes or so before it would restart. Also had the problem on a steep incline. Any ideas what's causing this problem?
Utv stalling
- Thread starter Mfrick01
- Start date
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 24,644
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
If it's carbureted, the float level is too low and it's being starved for fuel (provided it's a gas motor).
It is carbureted. Can the float level be adjusted?
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 24,644
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Take off the bowl and have a look. Usually you can bend the float tab to adjust the fuel level. Fuel level needs to be at the split between the carb body and the top of the float bowl.