Is there a company that makes steel pieces that can be welded at the valve stem area, and, next to the bead? The metal is very thin at, and for a couple of inches around, the valve stem. The bead itself is okay. Can’t be welded. I’m sure y’all have heard this saga 100 times. Thanks!
Valve Stem Area Repair on my 1010
- Thread starter Eddard
- Start date
- Views: 145
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,399
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
They can be repaired and welded but it is a time consuming, labor intensive, dirty job;
................before..................................................closeup of before.............
starting to wire brush.......................................It's hard to see but I've already welded in a machine bushing and ground it down, now starting on the bad cracks and missing metal...
,,,,,, the finished project.........................................mounted up, new tube, and a couple of boots..
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,399
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
I bought a new rim last year for the other side, didn't feel like spending the better part of 3 days messing around with one in a bit worse shape.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,545
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Liking zz's suggestion "if" there are other areas that are not as thin as what is now shown around the rusted valve stem hole.
pmsmechanic
Elite Member
- Joined
- Dec 6, 2013
- Messages
- 4,225
- Location
- Southern Alberta, Canada
- Tractor
- 4410 and F-935 John Deere, MF 245
That is possible but usually the hole has a flat area stamped into the rim so that the valve stem sits at an angle.
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,399
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
The contours of the rim shape and the necessity of getting the patch so it wouldn't tear up an inner tube. When I repaired mine I looked at salvage rims hoping to be able to cut a section out of a damaged rim to weld in. I only found a few salvage rims that were available and none of those had the right bends to match up with my rim.