oliver28472
Veteran Member
Never mind that. It's a food plot not a garden. /forums/images/graemlins/blush.gif
watering and spraying rig
- Thread starter MACHINIST01
- Start date
- Views: 3838
jeffinsgf
Veteran Member
PTO Pump would be more efficient for both jobs. One pump can be fit to different barrels quite easily, for either watering or spraying chemicals.
kuby
Silver Member
kuby
Silver Member
kuby
Silver Member
kuby
Silver Member
Watering trees in a row or shelterbelt
OP
MACHINIST01
New member
The only reason I wanted to use a bilge type pump is because they are easy to get ahold of.
JRP
Platinum Member
One question is how big is your tractor?
Attached is a photo of my water tank. It is a $40 300 gallon container that was used for a food additive. Poly plastic with galvanized box, plastic pallet, and plastic 2" ball valve. With a 2" valve you could easily gravity flow to empty. A 2" PVC header with 1/2" holes would empty pretty quick. Eliminating a pump would cut costs a lot and allow you to put more into the trailer. I tried to set up a hose with rope such that when I pull the rope the end of the hose is above the tank top = no flow. When I let out the rope the hose drops below the valve = water flow. Cheap valve. It did not work well but was an implementation problem, not an idea problem.
Anyhow, if you are making a trailer you could move 300 gallons at a time. A small tractor could pull the trailer. I use my container on a 3pt forklift. It is 2400 lbs full so I know it is back there. I water oak trees.
You could use a 2" water pump to fill the tank in about 3 minutes. You can leave the pump at the water hole and not have to pull it with tank.
You can clean a sprayer tank with amonia and not worry about contaminating your water with roundup.
Email me if you want a pic of the hose valve. It was made to water trees. Turns on/off the water without getting off the tractor.
jrpoux@tisd.net.
Attached is a photo of my water tank. It is a $40 300 gallon container that was used for a food additive. Poly plastic with galvanized box, plastic pallet, and plastic 2" ball valve. With a 2" valve you could easily gravity flow to empty. A 2" PVC header with 1/2" holes would empty pretty quick. Eliminating a pump would cut costs a lot and allow you to put more into the trailer. I tried to set up a hose with rope such that when I pull the rope the end of the hose is above the tank top = no flow. When I let out the rope the hose drops below the valve = water flow. Cheap valve. It did not work well but was an implementation problem, not an idea problem.
Anyhow, if you are making a trailer you could move 300 gallons at a time. A small tractor could pull the trailer. I use my container on a 3pt forklift. It is 2400 lbs full so I know it is back there. I water oak trees.
You could use a 2" water pump to fill the tank in about 3 minutes. You can leave the pump at the water hole and not have to pull it with tank.
You can clean a sprayer tank with amonia and not worry about contaminating your water with roundup.
Email me if you want a pic of the hose valve. It was made to water trees. Turns on/off the water without getting off the tractor.
jrpoux@tisd.net.
