WD for a 10K rated V nose enclosed trailer

   / WD for a 10K rated V nose enclosed trailer #1  

newbury

Super Star Member
Joined
Jan 8, 2009
Messages
14,776
Location
From Vt, in Va, retiring to MS
Tractor
Kubota's - B7610, M4700
Well it's taken years but I'm finally buying a 7x14 V nose enclosed trailer rated for 10K. I presently have an Equal-i-zer hitch rated for 14K and to mount that I'll probably have to put a two small holes for the brackets in the floor of the V.

But I'm open to getting a new WD hitch.

I've read good things about the Andersen hitches.

All etrailer seems to advocate are reese.

Any other advice from TBN?
 
   / WD for a 10K rated V nose enclosed trailer #2  
I've not used the Anderson. I have a couple Curt and 2 or 3 Reese. The Curt is heavy built, but I can't stand them, I won't be buying any more of them. You can't keep the hitch head positioned. I've got the little pin in place that they send with it, crank the tension bolt at the bottom, and cranked the bolts at tights as I can with a 3/4" ratchet and cheater pipe. The head will still slide back and forth. You can feel it slamming while you are driving. Never have had a problem with the Reese doing that. I broke a Reese hitch head once with the camper, totally my fault, wasn't adjusted quite right. Reese sent out a replacement hitch head at no cost. Stay with the Reese.
 
   / WD for a 10K rated V nose enclosed trailer #4  
I have an Andersen on a large pop-up trailer. I really like it. Easy to setup and adjustable. I needed a longer stinger for my setup and they quickly shipped out a new one.
 

Tractor & Equipment Auctions

UNUSED PALADIN SKID STEER HYDRAULIC BREAKING HAMMER (A51243)
UNUSED PALADIN...
2013 Ford Escape (A47477)
2013 Ford Escape...
BrushFox XHD72 72in Rotary Brush Cutter Skid Steer Attachment (A55787)
BrushFox XHD72...
Heavy Duty Semi-Automatic OJ-822S Tire Changer Machine (A55788)
Heavy Duty...
John Deere 4210 (A53314)
John Deere 4210...
Toro Workman HDX-D Utility Cart (A53421)
Toro Workman HDX-D...
 
Top