F.L. Jennings
Bronze Member
Cut a nice White Ash down by the Middle Fork weekend before last. Got part of it split and hauled then and finished up this past weekend. Also got a nice Hickory cut up on the high ground and started splitting that yesterday.
I've added a 12-14" high removable fence made of 1/2" pipe, on the back of the bucket and removable heavy forks about 18" long on the bucket cutting edge. These forks are spaced at about 14" apart and are used to help carry logs, firewood & etc. The fence fits into a couple of pipe sleeves welded to the bucket, and is kept in place with a 5/16" through bolt at each side.
The bucket bottom edge also has a grader blade welded on to stiffen and increase life of the cutting edge.
The add ons give extra capacity that is really beneficial when making trips to transport firewood over a half mile round trip. I have the backhoe mounted splitter mounted and after the wood is all split up I just turn around and load up every chunk of wood I can carry. I estimate that I doubled the volume of wood I can load with these additions.
The pipe brace on the bucket is a handy place to
carry an ax or other long handled tool. A bungee cord straps it in place.
I always fear that river since it has a nasty habit of claiming anything left there, but managed to get all of my labor hauled out with no loss to high water. I have just shy of 1000 hours on my L4200 and it has enabled me to do things I could never have done otherwise. It's amazing how many tasks you can think of to be done with a tractor. The older I get the more things I think of for it to do.
Heading out of the bottoms now, around the tail of the old river channel and back up through Cedar "holler" to home on ridge 100 feet above the River.
I've added a 12-14" high removable fence made of 1/2" pipe, on the back of the bucket and removable heavy forks about 18" long on the bucket cutting edge. These forks are spaced at about 14" apart and are used to help carry logs, firewood & etc. The fence fits into a couple of pipe sleeves welded to the bucket, and is kept in place with a 5/16" through bolt at each side.
The bucket bottom edge also has a grader blade welded on to stiffen and increase life of the cutting edge.
The add ons give extra capacity that is really beneficial when making trips to transport firewood over a half mile round trip. I have the backhoe mounted splitter mounted and after the wood is all split up I just turn around and load up every chunk of wood I can carry. I estimate that I doubled the volume of wood I can load with these additions.

The pipe brace on the bucket is a handy place to
carry an ax or other long handled tool. A bungee cord straps it in place.

I always fear that river since it has a nasty habit of claiming anything left there, but managed to get all of my labor hauled out with no loss to high water. I have just shy of 1000 hours on my L4200 and it has enabled me to do things I could never have done otherwise. It's amazing how many tasks you can think of to be done with a tractor. The older I get the more things I think of for it to do.

Heading out of the bottoms now, around the tail of the old river channel and back up through Cedar "holler" to home on ridge 100 feet above the River.