GaryM
Veteran Member
When my folks first moved to Pompano Beach FL, I saw them make a pick up from the Barnett Bank on Atlantic Avenue. Pretty neat as you say.
What Is This Chopper Up To?
- Thread starter PineRidge
- Start date
- Views: 1752
Is that the same Atlantic Ave in Delray Beach? I was just down there last week. I'm thinking very seriously about using SIP's for my new house, and the distributor/designer is located there.
Now that I think about it, it was at two Barnett banks where I saw the pickups being made. It was likely something that Barnett did for themselves. After becoming Nation's banks for a short time, they're all Bank of America, now. In some areas of the country, they joke that if you don't like the weather, wait a minute. In Florida, if you don't like the bank's name...
Now that I think about it, it was at two Barnett banks where I saw the pickups being made. It was likely something that Barnett did for themselves. After becoming Nation's banks for a short time, they're all Bank of America, now. In some areas of the country, they joke that if you don't like the weather, wait a minute. In Florida, if you don't like the bank's name...
slowzuki
Elite Member
- Joined
- Sep 19, 2003
- Messages
- 4,100
- Location
- New Brunswick, Canada
- Tractor
- Kubota L5030 HSTC, MF 5455, Kubota M120, Allis Chalmers 7010
The camera is likely a thermal imager. Here they check for faulty connections and grounds by looking for heating. Inspect hundreds of miles very quickly!
Ken
Ken
GaryM
Veteran Member
It was the Barnetts on Atlantic Avenue just West of US 1 in Pompano Beach.
My place is built with Enercept SIPs. Be sure to rip the bottom plate to 5 1/2". My builder didn't do so and had some issues getting the panels aligned. It was a PT plate and they will swell a little.
My place is built with Enercept SIPs. Be sure to rip the bottom plate to 5 1/2". My builder didn't do so and had some issues getting the panels aligned. It was a PT plate and they will swell a little.
