What length Piranha tooth bar for Kubota 66 inch bucket?
- Thread starter jmt1271
- Start date
- Views: 11538
N2DFire
Platinum Member
Both the Piranha bar and the L2501 are so popular I feel 99.99% safe in saying they have already made one before - just e-mail them and ask.
This is a small "Mom & Pop" type operation and they are very responsive & super helpful. Before I bought mine, I sent them an e-mail on a Sunday evening & had a reply with in an hour. I wasn't expecting anything till Monday at the earliest.
Congrats on the new tractor too.
This is a small "Mom & Pop" type operation and they are very responsive & super helpful. Before I bought mine, I sent them an e-mail on a Sunday evening & had a reply with in an hour. I wasn't expecting anything till Monday at the earliest.
Congrats on the new tractor too.
YLee Kioti
Platinum Member
Take a inside to inside measurement.
If it's anywhere near 65 1/4 to 65 1/2 inches you'll be fine.
The mounting ears are stout but can be adjusted or tweaked with a BFH if need be.
Also ask to include the stepping drill bit.
Once you've marked your centers and punched in a dimple. Drill a pilot hole.
Use step drill and you'll be done in very short order.
Use gloves when installing to mark install hole, teeth are truly sharp.
Congrats on tractor and enjoy.....
If it's anywhere near 65 1/4 to 65 1/2 inches you'll be fine.
The mounting ears are stout but can be adjusted or tweaked with a BFH if need be.
Also ask to include the stepping drill bit.
Once you've marked your centers and punched in a dimple. Drill a pilot hole.
Use step drill and you'll be done in very short order.
Use gloves when installing to mark install hole, teeth are truly sharp.
Congrats on tractor and enjoy.....
Got it ordered. Lol for some reason I thought it was 239 from glancing at the website.
That's for smaller B and Bx series buckets. Mine, shipped and including the stepped bit was like 360. Hopefully we'll have by next week. Tractor should arrive end of next week. Lord willing.
That's for smaller B and Bx series buckets. Mine, shipped and including the stepped bit was like 360. Hopefully we'll have by next week. Tractor should arrive end of next week. Lord willing.
N2DFire
Platinum Member
Worth. Every. Penny. :thumbsup:
Dad & I had our tractor for several months before we bought the PTB for it and I will be the first to say that it's night & day different trying to cut through iron enriched Virginia red clay. I know it's marketed as easily removable but I haven't found a reason yet to do so.
Now don't forget bragging pictures - everyone loves a new tractor.
Pictures will be uploaded soon as I have them.
And yeah the PTB seems well received.
My last tractor was a new JD 3720 back around 06-07. I remember how big a difference the tooth bar made on that loader but it was the standard 6-8 large teeth as opposed to a sharp serrated bucket wide cutting surface like this PTB.
For clearing brush I think the PTB should be phenomenal.
And yeah the PTB seems well received.
My last tractor was a new JD 3720 back around 06-07. I remember how big a difference the tooth bar made on that loader but it was the standard 6-8 large teeth as opposed to a sharp serrated bucket wide cutting surface like this PTB.
For clearing brush I think the PTB should be phenomenal.
