Grading What size box blade for a TC-35 ?

   / What size box blade for a TC-35 ? #11  
I can say from experience your TC35 will pull a 6 footer just fine. I'm pulling a 600 pound, 6' Bush Hog Box blade with ease. I usually run in 7th gear(12 gears total) just fine. When I drop the rippers all the way down and rip packed red clay, I have to shift down to 6th gear. There's little to no lugging unless I try to back blade a huge plie of dirt, but that's my fault. My TC35 is a CUT, not a dozer!
 
   / What size box blade for a TC-35 ? #13  
Our rear wheel are made in two parts -- the center or "dish" and the rim. The dish can be mounted concave or convex. The rim can be mounted inside or outside the dish. My wheels are set up with the dish concave ( or dish out) with the rims on the inside of the dish. My track is almost exactly 6 feet. If I mounted the rims outside, my track would be close to 7 feet.

Mark
 

Tractor & Equipment Auctions

2017 FREIGHTLINER M2 106 (A53843)
2017 FREIGHTLINER...
1980 Case IH 2wd 67hp tractor (A53473)
1980 Case IH 2wd...
2017 Polaris 500 Ranger Diesel Utility Cart (A53421)
2017 Polaris 500...
STOW One Tonne Tandem Smooth Drum Roller (A52377)
STOW One Tonne...
2014 Dodge 5500 4X4 Bucket Truck (A53473)
2014 Dodge 5500...
2013 Cadillac SRX (A50324)
2013 Cadillac SRX...
 
Top