What to do

[jwhiskeycharlie]

First, I've been a lurker for over a year doing my homework on what to get. In April, I bought a 2008 Kubota 2620 with FEL and I also got a Farm Force 60" box scraper from TSC. I also just bought the HF quick hitch that is 27.5" wide on the inside.

Now for my problem. I went to hook up with the box scraper, and things weren't quite right. I should have bought the adapter for the quick hitch. But my quick hitch measures 27.5" on the inside and the box scraper measure 27 5/8" on the outside. The pieces that are too wide are welded to the box scraper frame. The quick and dirty is to force the quick hitch wider and the best way would be to grind off the welds and re-weld the bar so I have the proper spacing.

Any and all suggestions welcome.

 

[cowboy357]

Welcome jwhiskeycharlie . its hard to say without pics . But I would be more apt to make the impliment fit the quick hitch other then the other way around.

Not all Impliments are set up the same or the same widths or pin size , between brands & types . Just My thoughts . best of luck . Bob