Hello everyone, I have a trailer I had gotton from my father long ago, it's missing the old heavy steel gates that were once a whole gate together until he cut thewm apart. I have since gotton rid of them because they were dangerous to pull down. I was wondering if anyone knows where I can buy a mesh gate for my trailer as I am a landscaper, so mesh would be fine.
Where to buy a gate for a 16ft trailer
- Thread starter Evan52098
- Start date
- Views: 709
s219
Super Member
- Joined
- Dec 7, 2011
- Messages
- 8,607
- Location
- Virginia USA
- Tractor
- Kubota L3200, Deere X380, Kubota RTV-X
Could maybe find a trailer dealer that could order one from the factory, and then you'd have to customize the hinges and get them welded on.
A welding shop could likely do it too, for a reasonable cost. For landscape gates, 0.0625" wall tubing is plenty strong enough, with the members 12-16" on center. That helps keep the weight reasonable.
A welding shop could likely do it too, for a reasonable cost. For landscape gates, 0.0625" wall tubing is plenty strong enough, with the members 12-16" on center. That helps keep the weight reasonable.
Diamondpilot
Super Star Member
- Joined
- Jan 18, 2007
- Messages
- 16,331
- Location
- Daleville, IN
- Tractor
- Jinma 254/284 Ford 861 Powermaster at work
A fab shop can make you the gate. These trailers are all a little different. I have built a few. $200 in materials and about that in labor.
Chris
Chris
