where tot buy mower blades for the x304

[xfarmboy]

I bought a set of hi lift mower blades from John deere dealer for my x300r and I found out that this uses a specific set of blades where one is a left and one is a right. The set I was given by the dealer has both left blades and no right blade. If I try to install these, I end up with one blade with the cutting edge backwards and it hits one of the bolts hanging down. The set came in a box with the part number AM141034 stamped on it. The original right hand blade is stamped with the part number M156559. I can't seem to find this anywhere. Does anyone have any suggestions what to use in this application?

 

[beenthere]

You will need to return to dealer if you have the wrong blades. What is the mower size (i.e width of cut) ?

Your AM141034 tracks back to a blade kit for a 42C deck. That fit with your deck?

 

[hosspuller]

Plus 1 ... take it back to the dealer... When you go, bring your model & serial number with you. There may be a serial number break at 85001 ( can't be sure from my reading)

 

[BBO]

It look like that mower had several options with all different blades.
I hope the deck still has a good sticker on it with the model & serial number visible.
"42" or "42M"?
Is the s/n above or below 150000?
Standard blade, Mulch, low lift, belt tensioner handle?
They do show the LH and RH blades to be different, but with no part numbers to identify them; they come in a kit.
Does it have a side discharge chute?
I suspect you will end up with a 156559 & 156558 blade but I have no idea what the kit number is.
The dealer would be the best to sort this out with the deck nameplate info.